MICNUMX INTEGRATED INDEX
a very good oscillator from Metaquotes
we will not analyze the type of calculation but we will focus on its use.
1) Input Signal by Crossing the Fast Line with the Slow, e.g. back to the above diagram we have 1 = short 2 = long 3 = short 4 = long 5 = short 6 = long 7 = short 8 = long the signals given by the oscillator.
2) Deviation area A gives an inverted warning.
3) the equilibrium level is 0 (UNDER THAT WE ARE IN TIME-BACK).
4) Mixed techniques and 3 previous.
the RVI is at the same time oscillator and signaling input and its simultaneous use with all oscillators of the unit is recommended.
NOTE IMPORTANT
the RVI oscillator responds better in long time frames and is appropriate daily (daily) & H4 (FOUR HOURS).
Last edited:
